HONDA Vehicle Diagnostics

This case demonstrates replacing the ECM/PCM in a HONDA vehicle using the VXDIAG device. The HDS system is used to synchronize the ECM/PCM with the Immobilizer Control Unit and Keyless Access System, ensuring the engine starts correctly.

 

 

 

 

 

I. Replace ECM/PCM [Video]

 

When the ECM/PCM is replaced, it is necessary to synchronize the ECM/PCM and the Immobilizer Control Unit-Receiver using the HDS (Honda Diagnostic System). For vehicles with Keyless Access System, the ECM/PCM must also be synchronized with the Keyless Access Control Unit; otherwise, the engine cannot be started.

Step-by-step ECM/PCM Replacement Process:

 

1. From the System Selection Menu, click [IMMOBI].
   
2. Click [Replace ECM/PCM].
   
3. Press tick to continue.
   (Obtain PCM-code from maris2/genpo/Distributor.)
   
4. Input PCM-code and press tick to continue.
   (The PCM-code is calculated using the Acura Code Generator.)
   
5. Turn the ignition switch off.
   
6. Turn the ignition switch on.
   
7. Turn the ignition switch off again.
   (The registration of immobilizer codes into the Immobilizer unit has been completed.)
   
8. Press tick to continue.
   (Check all keys to ensure each can start the engine.)
   
9. Click [NO] when asked if the vehicle is equipped with a Keyless Access Remote System.
   
10. Registration is complete. Press tick to continue.
    

11. Video: Replace ecm/PCM.

Direct preview may result in reduced video quality. We recommend downloading the video for better viewing experience.

II. Cancel Open Web Page When HONDA HDS Starts:

 

In Honda Diagnostic System version 3.014.011, web pages open automatically during each operation, but you can disable this:

1. Click [F12].
   
2. Navigate to [Service Information Search Server URL].
   
3. Select [Non-Network].
   

 

 

 

If you have any questions or need further assistance, please feel free to contact us via online chat or email:

Email: support@vxdiag.com