Download：VCX NANO Device Connection.pdf
Important Note: Before installing the drivers within VX Manager, be sure to install the official diagnostic software corresponding to your vehicle model. VX Manager is only a driver management tool, not a diagnostic software.
I. VCX NANO client installation, driver installation/firmware update methods：
VX MANAGER installation file download link：
https://vxdiag.com/blogs/blog/free-download-vxdiag-newest-vx-manager-and-beta-version-mega-links
1. After installing the ODIS software, run the installation package VX Manager X.X.X.XXXX.exe and follow the instructions to click Next to proceed to the next step
Select the driver installation according to the supported vehicle models of the NANO device (check 15-VAG - ODIS 6154 here), click NEXT next after selection, and continue until the installation is complete.
2. Diagnostic head connected to USB cable inserted into computer USB port；
3. Device firmware upgrade (as shown in the following figure)：
4. Driver update (installation)
Click on 'Diagnosis' to enter the vehicle driver menu;
The purple“+”symbol in the upper right corner of the vehicle driver icon indicates that there is a new vehicle driver to be updated (as shown in the following figure);
Click VW ODIS 6154 to open the driver installation interface;
Click [Update] to start installing the new driver;
![Click [Update] to start installing the new driver](https://cdn.shopify.com/s/files/1/0886/0300/1105/files/21_c33612b1-359f-496f-8138-c3e7a360a751.jpg?v=1767165637)
After completing the reading, click "Close" to complete the installation of the driver.
VW ODIS 6154 is marked with a green "√" and the driver is the latest version, no operation is required.
II. Update License：
If the prompt for license expiration appears during use, simply open VX MANAGER and click to update the license. The specific steps are as follows:
→Diagnose computer networking! Return to the desktop and open VX MANAGER
→View device license status
Click on [Information] → [Update License], and once the update is successful, you can continue to use it.
License update successful!
III. Two connection methods of VCX NANO:
1. Wired connection
Connect the VCX NANO to the computer via a USB data cable, and plug the VCX NANO into the vehicle's OBDII interface
Steps to view device serial port connection:
Computer desktop → This computer → Right mouse button → Management →
→ Device Manager → Ports → USB-Enhanced-ERIAL CH343 (COM *), seeing this (as shown in the picture) indicates that the device is connected to the computer.
2. VCX NANO Wireless WIFI Connection Method
VCX NANO plugged into the vehicle's OBDII interface → VCX NANO device powered on and started without the need for a USB data cable.
Click on WIFI network → Click on VCX-WIFI (device's WIFI signal name) → Automatic connection;
The password for the connection is: 12345678 (the new NANO does not require a password);
This status indicates a successful connection.
IV. 6154 VCX NANO ODIS-S Service Edition Driver Settings
Tools → Diagnostic Interface → Select VAS 6154 → Use the Selected VCI
V. VCX NANO also offers the following models of single bike equipment to choose from
