Many VXDIAG users experience compatibility issues when running Tech2 software on Windows 10 Pro with Vxdiag nano for GM. Recently, our customer, Mr. Robert shared his experience using the Tech2 software we provided, which helps resolve this issue. Below is his testing process and the solution he found.
VXDIAG User's Testing Results - Tech2 Software on Windows 10 Pro
Over the past few days, our customer Robert found the following:
-
Normal Operation of VXDIAG Software
He downloaded and installed the VXDIAG software from the link we provided and used it successfully. However, during use, he had to manually set the connection to ensure proper communication with the device. -
Compatibility Adjustment for Tech2 Software
Robert also successfully ran the Tech2 software on Windows 10 Pro. To ensure the software worked properly, he set the "compatibility" settings to "Windows 7" and turned off all antivirus software and Windows Defender. With these settings, the Tech2 software launched and ran smoothly on Windows 10 Pro. -
Problem After Installing ACDelco SPS Software
However, after installing the ACDelco SPS software, Robert found that the Tech2win software stopped working. He speculated that this might be due to driver conflicts or other compatibility issues between the software.
Solution: How to Run Tech2 Software Successfully on Windows 10 Pro
-
Set Compatibility Mode
The method used by Mr. Robert: He adjusted the "compatibility" setting to "Windows 7" and turned off all antivirus software and Windows Defender. VXDIAG engineers suggested the following solution: -
Dual-Boot System Setup
VXDIAG engineers proposed the following solution: If you encounter driver conflicts or other compatibility issues, you can consider setting up a dual-boot system. Install a 32-bit Windows 7 operating system on one hard drive and use it exclusively for running Tech2win software. The other hard drive can continue running Windows 10 or any other operating system.
User Experience Sharing
When sharing his experience, Mr. Robert mentioned:
"Thanks to VXDIAG's help, I was able to successfully reflash the body control module of my 2007 vehicle using VXDIAG and an ACDelco SPS subscription, and then reset the airbag system using your Tech2 software."
He believes that this information can help other VXDIAG users resolve similar issues and reduce the complexity of the process.
Summary
Mr. Robert's feedback provided valuable insights. By adjusting the system settings, he was able to successfully run Tech2 software on Windows 10 Pro.
If you are using Tech2 software through VXDIAG and encounter compatibility issues, you can try the above solutions to resolve the problem. With the right settings and configuration, you can smoothly use Tech2 software for vehicle diagnostics and programming.
We thank Mr. Robert for sharing his experience, and we hope it will help more users. If you have any questions or need further assistance, please feel free to contact us at support@vxdiag.com.
