VXDIAG PSA Diagbox Cannot Diagnose 2001 Citroen Jumper?

VXDIAG PSA Diagbox Cannot Diagnose 2001 Citroen Jumper?

Problem:

Tried to diagnose a 2001 Citroen Jumper using VXDIAG VCX SE and PSA diagbox software. Version 9.15 only scanned 1 control module and version 9.85 only scanned 5 modules, any idea?

https://vxdiag.com/products/vxdiag-vcx-se-for-psa

Solution:

VXDIAG J2534 only supports 2006 onwards Citroen Peugeot vehicles.

It does not work properly on -2006 older K-line models. So it is normal if it cannot scan all modules for older models.

Another important point is that install Diagbox software on a separate system or partition. It may conflict with diagnostic software.

, , , , , ,
0 коментари
Етикети:Diagnostic Tool, J2534 Diagnostic Interface, OBD2 diagnostic tool, OBD2 Scanner, PSA, Vcx se, VXDIAG

Последни статии

Оставете коментар

Вашият имейл адрес няма да бъде публикуван. Задължителните полета са маркирани. *

Моля, обърнете внимание, коментарите трябва да бъдат одобрени, преди да бъдат публикувани