VXDIAG PSA Diagbox 9.85 VCI is Not Connected Solution

VXDIAG PSA Diagbox 9.85 VCI is Not Connected Solution

Problem:  问题：

Got the PSA driver installed and vx manager detected the VXDIAG VCX SE PSA VCI. Followed the instructions to install Diagbox 9.85 but the software did not see VCI. No VCI connection with software and vehicle.

Any solution? 

VXDIAG PSA Diagbox 9.85 VCI is Not Connected Solution
VXDIAG PSA Diagbox 9.85 VCI is Not Connected Solution 1

Solution:

Technician did a Teamviewer check and found some programs on his system are in conflict with the PSA driver.

Don’t install GM, VAG, Nissan, Ford etc software with Diagbox driver and software.

VXDIAG PSA Diagbox 9.85 VCI is Not Connected Solution 3

Install Diagnox 9.85 on a separate laptop or partition.

, , , , , ,
0 коментари
Етикети:Diagnostic Tool, J2534 Diagnostic Interface, Key programming, OBD2 diagnostic tool, OBD2 Scanner, PSA, VXDIAG

Последни статии

Оставете коментар

Вашият имейл адрес няма да бъде публикуван. Задължителните полета са маркирани. *

Моля, обърнете внимание, коментарите трябва да бъдат одобрени, преди да бъдат публикувани